Blog Detail
Frequently Asked Questions About TD163 Paging System
- Nancy
- Apr 8, 2023
- 8 Comments
We have sorted out the frequently asked questions and answers about the TD163 paging system to make it easier for everyone to know how to use the TD163 paging system.
1. How to set pager ID?/How to add additional pagers?
Pairing Pager ID Setting (F2)
Press “Call” and “Delete” buttons at the same time to enter the setting
mode, “F1” shows on display, enter number “2” through the keypad,
“F2” shows on display. Press “Call” button to enter sub-menu, “0” shows on display. Enter the ID number through Keypad (1-998). Remove the pager from charging slot, and press “Call” button Within 5s, at the same time, the pager flashes and beeps. It means to be set successfully. Then it will return back to “F2”.
You can also refer to the video in the link below.
https://www.youtube.com/watch?v=b2N35U7rLec
2. How to set keyboard ID?
Keypad ID Setting (F1)
Press “Call” and “Delete” buttons at the same time to enter the setting
mode, “F1” shows on display. Press “Call” button to enter sub-menu, “0” shows on display. Enter the ID number through Keypad (1-999).
Press “Call” button to confirm and it will return back to “F1”.
You can also refer to the video in the link below.
https://www.youtube.com/watch?v=b2N35U7rLec You can also refer to the video in the link below.
https://www.youtube.com/watch?v=b2N35U7rLec
3. How to set the pager reminder mode?
1. Beep Prompt Speed Setting (F4)
Press “Call” and “Delete” buttons at the same time to enter the setting mode, “F1” shows on display, enter number “4” through the keypad, “F4” shows on display. Press “Call” button to enter sub- menu, “0” shows on display. Enter the desired value (0 for turn off beep, 1 for slow mode, 2 for medium speed, 3 for fast mode). Remove the pages from charging slots, and press “Call” button within 5s, at the same time, the pages flash and beep. It means to be set successfully.
Then it will return back to “F4” automatically.
2. Vibration Prompt Setting (F5)
Press “Call” and “Delete” buttons at the same time to enter the setting mode, “F1” shows on display, enter number “5” through the keypad, “F5” shows on display.Press “Call” button to enter sub -menu, “0” shows on display.Enter the desired value (0 for turn off vibration, other values for turn on vibration mode).Remove the pages from charging slots, and press “Call” button within 5s, at the same time , the pages flash and beep. It means to be set successfully. Then it will return back to “F5” automatically.
3. Flash Prompt Speed Setting (F6)
Press “Call” and “Delete” buttons at the same time to enter the setting mode, “F1” shows on display, enter number “6” through the keypad, “F6” shows on display.Press “Call” button to enter sub -menu, “0” shows on display. Enter the desired value (0 for turn off flash, 1 for slow mode, 2 for fast mode, 3 for breathing light mode). Remove the pages from charging slots, and press “Call” button within 5s, at the same time, the pages flash and beep. It means to be set successfully. Then it will return back to “F6” automatically.
You can also refer to the video in the link below.
https://www.youtube.com/watch?v=f7djb-i2nRM&t=23s
4. How to turn off all pagers with one key?
Place the pager on the charging slot, press "999" and press the call button
Turn off any pagers in the charging bay.
5. The vibration reminder is turned on, but the pager does not send out a vibration reminder, what's the matter?
Because the reminder time set by the pager is too short.
The TD163 pager first sends out buzzer and flash reminders at the same time, and then sends out vibration reminders. Therefore, if the reminder duration of the pager is set relatively short, for example, only 3 seconds, the pager has no time to send out a vibration reminder, and the reminder has already been turned off. So in this case, you only need to set the reminder time of the pager to be longer.
6. How to set the reminder duration?
Prompt Time Setting (F3)
Press “Call” and “Delete” buttons at the same time to enter the setting
mode, “F1” shows on display, enter number “3” through the keypad,
“F3” shows on display. Press “Call” button to enter sub-menu, “0” shows on display. Enter the desired reminder duration through Keypad (0-250s, if you set 0s, the pager will not stop automatically until you put it back to the charging slot) Remove the pages from charging slots, and press “Call” button within 5s, at the same time, the pages flash and beep. It means to be set successfully. Then it will return back to “F3 " automatically.
If the problem you encounter is not in the above content, please click here to contact us at any time, Retekess promises to provide you with a full range of services.
Comments (8)