Frequently Asked Questions About TD175 and TD175P Paging System

Are you having some operational problems with the TD175 and TD175P Paging System? Check out this article for frequently asked questions and answers about the TD175 and TD175P paging system.

1. How to set pager ID?/how to pair pagers?/How to add additional pagers?

Press [Set] key to enter setting mode, the F1 is shown on display.

Press [Call] key to enter the paring mode, the charging indicators on pagers will turn off, and other indicators will turn on. 000 shows on the display. Remove a pager from the charging slot, and enter a desired number (1-998 ) through the keyboard within 10s. Press [Call] key to confirm, the pager beeps, paring is done

Note:

(1) Repeat above steps to pair other pagers

(2) Press [Back] key twice to exit the setting mode

You can also refer to the video in the link below.

https://www.youtube.com/watch?v=HcT5z03-u5E

2. How to set keyboard ID?

Press [Set] key to enter setting mode, the F1 is shown on display

Press “△” key 3 times, F4 is shown on the display

Press [Call] key to enter the sub-menu

Enter the desired transmitter ID (1-999) through the keyboard

Press [Call] key to confirm

You can also refer to the video in the link below.

https://www.youtube.com/watch?v=KM773-uey0Q

3. How to turn off all pagers with one key?

Enter 999 in the Call Mode(000), press [Call] key, all the charging pages will be off. All charging indicators will turn off for 5 seconds, and then light up again to indicate the charging status.

If you have other questions, please click here to contact us here. Retekess promises to provide you with a full range of services.