Many customers may face the problem that the Retekess TD103 calling system pager has short notice time. Actually, you can set the notice time from 05-98 seconds. The number entered indicates the number of seconds of sound and light and vibration. The 01-04 time is too short to be set, and the minimum setting is 5 seconds. When set to 00, it means unlimited time. In addition, when the sound, flash, and vibration are set to off, this setting will not open the closed setting, and still follow the settings of F2 to F4.
Then if you do face the problem, please follow the below steps.
When you enter setting mode, enter 2580(or the one you had changed) as the password to enter F1, click - or + button to change to F0, then click √, then you can change the time, press 05-98 to set the notice time you want. If you need to change other settings, do it. After all the settings are changed, you can pair all the pagers again. Then the notice time will be working.
If F0 you set 00 and close all the lights flash and vibration and rings, when you call the pager, the number on the pager will flash all the time unless you put on the charger base.
If you set F0 as 00, and all the lights flash and vibration and rings are open, when you call the pager, the mode you set will work all the time until you put it back.
There are 3 modes, light flash, vibration, and ring, you can combine them by yourself. For these 3 modes, you can set them as 0: Off 1: slow speed 2. medium speed 3. fast speed. You can set them according to your needs.
Retekess TD103 Long Range Coaster Pager System 1000m Out of Range Alarm for Restaurant, Hospital, Warehouse
More than 1000 meters/3280 ft coverage in open area
7 prompt methods: vibration, flash and beep, combine freely
Adjustable reminder duration: 5-99s
Out of range alert; Service countdown notice; IP54 waterproof pagers
Support protocol (contact us if you need)
It can be widely used in many industries, restaurants, coffee shops, libraries, etc. If you have any other questions, feel free to contact us at support@retekess.com
Comments (3)