Put the pages on the charging base,press P and 999(P999 displayed), then pressCALL to enter programming mode. The operation must be finished in 20 seconds after pages are charged.In programming mode, all LED display of the pages will keep flashing .Then input number and press CALL, all pages display this nunber. Move the top pager away, the pager will beep once and stop flashing. It means the pager is programmed. Repeat the steps to program other pages.
Note: The pagers will quit programming mode if no operation within 1 minute. All pagers’ numbers will not change if not being programmed.
1 pager only can be programmed 1 number. Old number will be replaced by the new one.
You can also refer to the video at the link below
Press MUTE and 999(S999 displayed) then press CALL, all charging pages change to MUTE mode.
Press MUTE and 000(S000 displayed) then press CALL, all charging pages change to normal mode.
In CALL mode, press 999 and CALL, all charging pagers will be off.
If you need other help, please click here to contact us, we will provide you with a full range of services.