Based on the lightweight and small size, stable and crystal clear audio quality, long-range, multi-channel streaming and long-time continuous usage, the TT103 tour guide system has been widely and successfully used in Tourism, Business, Education, International Conference, Sports Training and Churches. The item could be used as a communication tool as well as a simultaneous translation.
Considering the usage for the TT103 tour guide system, there are 3 new features added to make the product easier to use.
1, Mute function for transmitter
If the guide does not want the audience to hear from them, he could set the mute function for the transmitter.
The way to operate:
In working mode, press the“” button to mute (the signal icon “” on the display screen will change to the mute icon “” ), in this mode, all the receivers will not receive any signal from the transmitter.
Click again the “” button will restore the speak function (the mute icon “” will change to signal icon “”).
2, Wireless channel setting
The guide could set all the receivers to work with the transmitter in a quick way. Saving a lot of time on setting them one by one.
The way to operate:
In working mode, keep pressing both“”and “”button at the same time until the channel number on the screen is flashing, then release both buttons, now the transmitter has entered the channel setting mode, then you can click the “” or “” button to change the channel number (the channel number can be changed from 001 to 200), after you have chosen the channel number, keep pressing “M" button for about 3 seconds until the flashing signal icon “” appears, then release the “M" button, now the transmitter has entered the wireless channel matching status and the receivers’ channel will come to the same as the transmitter’s channel within 5 seconds. Now the wireless channel matching is finished. Then you can click the transmitter’s “M” button to quit the channel matching status, now if the guide speaks to the transmitter, all the audience will hear him via the receivers.
(Please note that the receivers must be powered on before setting and within 2 meters from the transmitter)
3, Click one button to turn off all the receivers
In working mode, keep pressing the “” button for about 5 seconds until the screen is flashing and “OFF” appears, all the receivers will be forcibly turned off. Now you can click any button of the transmitter to quit or keep pressing the “M” button to turn off.
If the information helpful for you to use the TT103 tour guide system?
Please let me know freely if you have any questions about operating Retekess products.