Long working distance
Improve service and efficiency
Support 256 call buttons
1-24 beds LED prompt
Ideal for hospitals, nursing homes and assisted-living facilities.
With voice prompts and screen display, convenient to know which room and bed need help,
This healthcare receiver of call system is easy to install and use
Wall-mounted design,no need to lay out a lot of wires to make it work, just need to plug it in the power
The healthcare call system with powerful and stable signal, the range up to 100m with many walls or stairs
Voice prompts and screen display
The volume of sound is adjustable for the receivers from 0 to 9 levels according to our needs, the call information of room and bed number could be seen on the screen
When the patient calls, the corresponding bed number LED flashes on the receiver (The TD121 Supports 1-24 beds, and TD122 supports 1-60 beds)
Easy to add the call buttons
The health call system supports 256 call buttons, very easy to add and remove
Time and date display
In standby mode, it shows date and time on the screen, it could be set easily and no need to reset after power off
Solutions of Healthcare Receiver
If you need the whole set, pls email us: firstname.lastname@example.org
Please fill in your procurement needs and contact information
Working frequency: 433MHz
Speaker: 8ohm 2W
Maximum number of call buttons supported: 256 pcs
Room and bed number can be coded in range: 001-999
Adapter: Input: AC 100-240V 50/60Hz, Output: DC 9V/1A
1 x TD121 receiver
1 x Power adapter (US/EU/UK type available)
1 x User manual
Q: Can the volume be adjusted?
A: Yes, 0-9, a total of ten levels of sound for you to choose.
Q:How many beds can be connected to TD121 at most?
A: 24 beds can be connected. TD122 can connect up to 60