1. Cleaning of noise reduction hearing aids
Hearing aids are complex and sensitive electronic devices that require regular cleaning of earwax and ear debris on the surface of the product and proper maintenance, such as wiping with dry cotton and soft cloth, and do not use any solvents and detergents.
2. Storage of affordable hearing aids
When the hearing aid is not in use, place the hearing aid in the charging base in a dry place to prevent the device from continuing to work, which can extend the life of the device and save battery power.
1. After the invisible hearing aid is picked up from the charging base and placed in the ear, the hearing aid automatically turns on after 5 seconds.
2. When the hearing aid is on, long press the M key to turn off the hearing aid. When the hearing aid is off and not in the charging base, long press the M key to turn on the hearing aid.
3. When the hearing aid is placed in the charging base, it automatically turns off.
1. The hearing aid has 6 volume levels. Each time the volume is adjusted, the product will make a short beep as a reminder
2. After the hearing aid is turned on, short press the "+" button to increase the volume. When set to the maximum volume, the hearing aid will make a long "beep"
3. After the hearing aid is turned on, short press the "-" button to reduce the volume. When the volume is set to the minimum, the hearing aid beeps three times
1. When the hearing aid is turned on, short press the M button to switch the hearing aid mode.
2. The prompt tone "beep" is for hearing aid mode 1: indoor mode
3. The prompt tone "beep" is for hearing aid mode 2: outdoor mode
4. The prompt tone "beep beep" is for hearing aid mode 3: movie mode
5. The prompt tone "beep beep beep" is for hearing aid mode 4: general mode (general mode is standard mode)
6. Clear hearing aids can automatically remember the mode set before the last shutdown.
1. Charging time: 1-2 hours. A single charge can be used for up to 8 hours. Total battery life: 40 hours.
2. Insert the hearing aid into the charging base, and the hearing aid will automatically charge. Wipe the contacts before each charging to reduce equipment failures. When the hearing aid starts charging, the digital screen of the charging base will wake up, displaying the current power status of the charging base and the charging status of the hearing aid, and will automatically go out after about 10 seconds.
3. When the long-lasting hearing aid is taken out of the charging base, the charging base will display the remaining power of the base.
4. The charging base can support the hearing aid to be charged about 4 times.
5. When the power is too low (less than 15%) and the voltage is less than 3.4V, a low-power "beep beep" prompt sound will be emitted, and the smart hearing aid will automatically shut down when the voltage is less than 3.3V.
TE201 noise reduction hearing aid has six levels of volume adjustment and four modes. The rechargeable charging base provides four charges, which is convenient for carrying and use. The smart hearing aid is equipped with 16 channels and 45db dual microphone gain, providing a satisfactory solution for middle-aged and elderly people with mild to moderate hearing loss with clear sound.