How to Use TD177 Paging System

As a comprehensively upgraded paging system, TD177 is slightly different from other products when used. This blog will introduce how to use TD177 and the questions you may encounter when using it.

1. How to set the working mode of pager?

Press the setting key on the keyboard and enter the password. When "E-" is displayed on the keyboard, it means that it has entered the setting state.

2. How to pair the keypad with the pager?

First make sure you have power on the paging system and the keypad has batteries or is plugged into a power source. The charging base is also plugged into the power source at the same time. If you have confirmed that the power supply is plugged in. Then we can start now.

If it is your first time to use TD177 for pairing, please make sure you have entered E-01 to press the ''call'' button to set the system ID to ''001'', and entered E-02 to press the ''call'' button to enter the number ''001''. This will make our operation much easier.

(If you already know how to set the keyboard system ID, please skip this description: We can press the setting key and enter the password manually. The keyboard will display "E-", which means you have successfully entered the setting state. Press the up and down keys. Press the call key when the keyboard displays "E-01", and then you can set the system ID. If it is your first time to use TD177, we will recommend that you enter the system number ID as the number 1, which will make it easier for you to set up future operations. )

Confirm to return to the main interface, which is the standby state of the keyboard, and enter the system ID, which is the number 1 set in E-01. Then press the black raised button on the lower right side of the charging base, and then press the F1 key. At this time, you will see all the pager numbers in the charging slot light up, which means that the pager and keyboard are successfully paired.

3. How to operate the one key code-changing function?

We need to set the numbers in our system id numbers E-01 and E-02 to ''001'' and make sure you have paired the system with the pager. Remember how to pair keypad with pagers? That is to say, enter the system ID number of the system on the main interface, which is the number "001" we set in E-01, then press the raised button on the lower right side of the charging slot, and then press the F1 key. The pager light will light up. That means we matched successfully.

Now we can start operating the one key code-changing function. First, we return to the main interface of the keyboard, enter the starting number "001" of a pager, and press the F2 shortcut key. At this time we will find that the pager starts to automatically encode one by one. This means our operation was successful.

4. What should I do if I want to pair and change the pager number in the second base or the third base?

Please confirm that the number you entered in ''E-02'' is still the number ''001''.

Then we can begin. If you want to pair the pager in the second charging slot, you can set the system id number, which is the number in Settings E-01, to the number ''002'',  we should pair the keypad with the pager in the second charging slot: Enter the base ID as ''002'' on the main interface, press the black raised button on the lower right side of the second charging slot, and then press F1 to pair successfully.

Return to the main interface, press the starting number number 1, and press F2 again. At this time, the pager number in the second charging slot is 11-20.

If you want to pair the pager in the third charging slot, you can set the base ID number to ''003'', and then pair the keypad with the pager in the third charging slot. How to pair it with the pager in the third charging slot? Enter the base ID as ''003'' on the main interface, press the black raised button on the lower right side of the third charging slot, and then press F1 to pair successfully.

Return to the main interface, press the starting number number 1, and press F2 again. At this time, the pager number in the third charging slot is 21-30.

5. Things to note about pairing

If you reset the pager's working mode setting in E-03 to E-12 after pairing, you need to pair the pager with the system again to make the pager work properly.Enter the system ID on the main interface, press the raised button on the charging slot, and then press the F1 pairing shortcut key. At this time, you can save the functions you changed. 

6. What are F1, F2, F3 and F4 on the keyboard used for?

F1 is the shortcut key for the pairing function, F2 is the shortcut key for the one-click code changing function, and F3 is the shortcut key for the group calling function. F4 is used with Retekess TD112 watch.

Clik here to see the video about How to Set the Pager's Working Mode of Retekess TD177 Paging System.

Clik here to see the video about How to Set Up the Pairing and One Key Code-Changing Function of Retekess TD177 Paging System.

Clik here to see the video about How to Set the Keypad Working Mode of Retekess TD177 Paging System.

If you have any questions, feel free to email us at support@retekess.com. Thank you.